Archive for the ‘Mats Lewan’ Category

Av: Mats Lewan
Published 29, October 2011 01:59 34 kommentarer

UPDATED. Half a megawatt thermal power in self sustained mode, for over five hours. That’s what Andrea Rossi obtained with his E-cat plant on Friday, according to his customer. The question now is who the customer was.

Rossi outside the building during the test. In the background the heat plant with pumps and water tanks to the right, additional Ecats on the top and the steam outlet to the left.Rossi outside the building during the test. In the background the heat plant with pumps and water tanks to the right, additional Ecats on the top and the steam outlet to the left. Photo: Mats LewanThe customer's controller Domenico Fioravanti.The customer’s controller Domenico Fioravanti. Photo: Mats LewanTwo of the four heat dissipators.Two of the four heat dissipators. Photo: Mats Lewan
Manometer at one of the waterpumps indicating a pressure of almost 4 bars.Manometer at one of the waterpumps indicating a pressure of almost 4 bars. Photo: Mats Lewan

A water leakage could be observed efter the end of the test.A water leakage could be observed after the end of the test. Photo: Mats Lewan

Read more

(Swedish version here).

At about quarter past ten on Friday October 28, the test of Andrea Rossi’s heat plant, potentially producing one megawatt, was initiated in an industrial hangar in Bologna.

The plant consisted of more than 100 ‘energy catalyzers’ – Rossi’s invention that possibly produces heat from a hitherto unknown nuclear reaction – connected in parallel.

Already in January 2011 when the E-cat was demonstrated publicly for the first time before a group of invited scientists and journalists in Bologna, Rossi promised the launch of a one megawatt plant in October.

The test was supposed to be performed together with the Greek company Defkalion, and later, after a breach of contract in August, in the US.  Finally, as the US agreement was never put in place, the test was performed in Bologna under the control of a yet unknown customer to Rossi.

According to the customer’s controller, Domenico Fioravanti, the plant released 2,635 kWh during five and a half hours of self sustained mode, which is equivalent to an average power of 479 kilowatts – just under half the promised power of one megawatt.

Rossi explained this with the customer’s priority to achieve self sustained mode, which supposedly makes the process more difficult to control than when electrical power is supplied to support the reaction.

“We had to decrease the power during self sustained mode as the temperature rose too much”, Rossi said after the test.

Neither Ny Teknik nor any other of the guests had any possibility to check the measurements made. The invitees could only observe the plant in operation for a few brief moments.

Assuming that the report is correct (the report can be downloaded here, the temperature data here), a substantial amount of energy was released, which is difficult to explain by anything other than heat being developed inside the E-cat, even if you subtract the power input during pre-heating.

UPDATE: There are two minor errors in the report. See below.

According to the report the test was approved and the plant would now be transported to the customer where it supposedly will be part of an agreement on further tests in order to develop the technology.

It remains unclear who the customer is. Rossi has only indicated that it belongs to a particular category of organizations. One possibility is that it’s a military organization given that the title of the controller Fioravanti in the report is “colonel”, however, scored out with a pen.

Rossi stated that an agreed contract research at the University of Bologna can now be initiated and that discussions on collaboration with Uppsala University can get started.

There’s still no clear indication of when a test performed by independent experts can be done, although this is still what both readers of Ny Teknik and most experts Ny Teknik has spoken to demand.

– – – –

READ MORE: Our complete coverage on Rossi’s E-cat can be found here.

– – – –

More details on the test here below.

– – – –

UPDATE: David Roberson who made one of three analyses that Ny Teknik published last week on the October 6 test , has made an updated analysis here, which he claims contains proof that the E-cat generated a large amount of excess energy.
Also Horace Heffner’s analysis has been updated.

– – – –

UPDATE 2: There are two minor errors in the customer’s report:
1. The weight of the hydrogen bottle should be in grams, not kg as indicated.
2. The indicated flow rate of the pumps at the end of the report should be 350 kg/hour, not 750 kg/hour, giving a total of 700 kg/h, not 1,500 kg/h, for the two pumps.
(The measured average flow rate of 675.6 l/h in the first part of the report should be correct).

Advertisements

Three extensive analyses have been made of data from the test of Andrea Rossi’s E-cat on October 6. Two point to a clearly anomalous heat production, while the third leaves the question open.

by Mats Lewan

Interest in the latest test of Andrea Rossi’s energy catalyzer has exceeded that in any previous test. The result has been discussed intensely internationally. Does Rossi’s apparatus generate net energy. If so, how much.

The shortcomings of the test measurement methods were clear, though significant improvements had been made compared to previous ones. Data were retrieved only because Ny Teknik, without being prepared, took responsibility for gathering and recording the readings.

A first, conservative analysis of the measurements was made by Ny Teknik’s reporter immediately after the test (here’s a spread sheet with the data). Three extensive subsequent analyses have been done by the Americans Horace Heffner, David Roberson and Bob Higgins.

All three noted that deficiencies in the measurement methods make the result uncertain. Among the flaws is questionable positioning of the thermocouples for measuring water temperature.

In dialogue with Ny Teknik, however, Heffner, Roberson and Higgins tried to get answers to various questions to reduce uncertainty as much as possible.

The three made different assessments of what conclusions can be drawn.

Most skeptical was Heffner who wrote:

“Due to the locations of the thermocouples, the temperature measurements lack the degree of credibility required to make any reliable assessment of commercial value.  The net power output could be anything from negative to positive.”

(Heffner’s complete analysis is here).

Roberson agreed on the problem regarding the thermocouples, yet drew a more positive conclusion:

“The long period of relatively constant heat production following deactivation of the E-cat main internal core heater suggests significant excess energy.  Accurate determination of that energy cannot be established due to imperfections of the test setup.”

(Roberson’s complete conclusion is here, spread sheet analysis here).

Higgins also believed that the E-cat generated net energy:

“Despite the test’s flaws (and considering the integrity of those involved), the data suggests that substantial excess energy (as heat) was produced. (…) Critical error analysis of the experiment will continue; but the expectation is that errors will be unable to account for the large excess heat output.”

(Higgin’s complete conclusion is here, spread sheet analysis here).

Another person who commented was the American Jed Rothwell, who has followed the area LENR (Low Energy Nuclear Reactions) for many years.

He wrote: “The test produced irrefutable proof of anomalous energy production, in several different ways. After input power was turned off, not only did it remain hot for 4 hours, it twice sharply increased in temperature. This is first-principle proof that large amounts of energy were being generated inside the reactor.”

He also described a simple experiment that those who doubt the conclusion can perform.

(Rothwells conclusion and suggested experiment is here, and a comment by him also on lenr-canr.org).

Currently, there seems to be no way to get further with the data from the test on October 6 (minor updates to these documents will be done though – check for the most recent versions).

Rossi’s sight is now set on a test October 28 of a heat plant supposed to generate one megawatt thermal power. The test will be performed under the control of an unidentified customer who will buy the heat plant, provided that the promised power consumption to heat output ratio can be verified by the customer.

According to most people Ny Teknik spoke to, it is doubtful whether the test of the large heat plant can provide a clearer answer regarding net energy produced than tests of single modules of the energy catalyzer have done so far.

Both independent analysts and Ny Teknik’s readers ask instead for a new test of a module, but with much more accurate measurement methods, preferably conducted by independent persons at a neutral site.

Meanwhile competition seems to build up. The Greek company Defkalion Green Technologies which had a license agreement with Rossi until August when Rossi communicated a breach of contract, recently claimed that it not only has developed a product for the energy market but also its own core technology based on “Rossi’s invention or similar inventions.”

Defkalion’s VP of R&D and board member Prof Christos Stremmenos declared in a letter that this was not true. Alexandros Xanthoulis, representing the owners of Defkalion, then answered that Stremmenos didn’t have knowledge about this as he had been absent for several months.

According to Ny Teknik’s sources, Defkalion continues to meet with companies interested in acquiring licenses for manufacturing and distribution of Defkalion’s products, at a license fee amounting to 40.5 million Euros per factory.

The sources also told Ny Teknik that Defkalion offers interested clients to see its technology and let them verify the validity of it with independent scientists of their choice, after having deposited 500,000 Euros in an escrow account.

UPDATE (Oct 21, 16:45): Defkalion confirms this information with the following statement: “Price for exclusive license is 40.5 million Euros which includes blue prints, transfer of knowledge, and training to establish an operating factory producing up to 300.000 Hyperion [Defkalion’s product name] units annually. Potential licensees contact Defkalion with an interest to assume this exclusive license. They are invited to perform independent tests on our products with their own instruments. The 500,000 Euros in an Escrow Account is payable only on the condition that they are satisfied by the results of their measurements and they wish to proceed in the signing of a full contract.” (End of update)

Another researcher who works with LENR between nickel and hydrogen is the Italian Prof Francesco Piantelli who previously conducted research with Rossi’s scientific adviser, Prof Sergio Focardi.

According to Newenergytimes.com NASA shows interest in Piantelli’s work and in the company Nichenergy which is linked to his research.

– – – –

READ MORE: Our complete coverage on Rossi’s E-cat can be found here.

Energy Catalyzer gets U.S. partner

by: Mats Lewan, Nyteknik

Andrea Rossi, the energy catalyzer inventor, has reached an agreement with a new company in the United States. The agreement builds on several years of contacts with people linked to the U.S. Department of Energy.

The fresh agreement outlines commercial plans in North- and South America for the energy catalyzer – the device that seems to produce large amounts of energy via a hitherto unknown and not fully understood nuclear reaction.

read more:

Nyteknik – Under a new agreement, a newly formed company, Ampenergo, will receive part of the royalties on all sales of licenses and products built on the energy catalyzer in the Americas.

AmpEnergo certificate of Organization:

Ampenergo+Certificate+of+Organization–

http://ampenergo.com/