UPDATED. Half a megawatt thermal power in self sustained mode, for over five hours. That’s what Andrea Rossi obtained with his E-cat plant on Friday, according to his customer. The question now is who the customer was.
- TV: New test of the E-cat enhances proof of heat
self-sustained mode” href=”http://www.nyteknik.se/nyheter/energi_miljo/energi/article3264362.ece”>See the E-cat run in
Greek energy box” href=”http://www.nyteknik.se/nyheter/energi_miljo/energi/article3208908.ece”>’E-cat’: Here is the
Greek energy box
gets U.S. partner” href=”http://www.nyteknik.se/nyheter/energi_miljo/energi/article3179019.ece”>Energy catalyzer
gets U.S. partner
- Ny Teknik tested the energy catalyzer
- And here are 36+3 more questions – with Rossi’s answers
- E-cat inventor in live chat with the readers
- This is how Rossi is financing his E-cat
- Cold Fusion: “You have to embrace this”
- Cold Fusion: 18 hour test excludes combustion
- Cold fusion may provide one megawatt in Athens
- Cold Fusion: Here’s the Greek company building 1 MW
- Cold fusion: Observing researcher wants more tests
- Kall fusion – nu ska den vara klar för produktion
(Swedish version here).
At about quarter past ten on Friday October 28, the test of Andrea Rossi’s heat plant, potentially producing one megawatt, was initiated in an industrial hangar in Bologna.
The plant consisted of more than 100 ‘energy catalyzers’ – Rossi’s invention that possibly produces heat from a hitherto unknown nuclear reaction – connected in parallel.
Already in January 2011 when the E-cat was demonstrated publicly for the first time before a group of invited scientists and journalists in Bologna, Rossi promised the launch of a one megawatt plant in October.
The test was supposed to be performed together with the Greek company Defkalion, and later, after a breach of contract in August, in the US. Finally, as the US agreement was never put in place, the test was performed in Bologna under the control of a yet unknown customer to Rossi.
According to the customer’s controller, Domenico Fioravanti, the plant released 2,635 kWh during five and a half hours of self sustained mode, which is equivalent to an average power of 479 kilowatts – just under half the promised power of one megawatt.
Rossi explained this with the customer’s priority to achieve self sustained mode, which supposedly makes the process more difficult to control than when electrical power is supplied to support the reaction.
“We had to decrease the power during self sustained mode as the temperature rose too much”, Rossi said after the test.
Neither Ny Teknik nor any other of the guests had any possibility to check the measurements made. The invitees could only observe the plant in operation for a few brief moments.
Assuming that the report is correct (the report can be downloaded here, the temperature data here), a substantial amount of energy was released, which is difficult to explain by anything other than heat being developed inside the E-cat, even if you subtract the power input during pre-heating.
UPDATE: There are two minor errors in the report. See below.
According to the report the test was approved and the plant would now be transported to the customer where it supposedly will be part of an agreement on further tests in order to develop the technology.
It remains unclear who the customer is. Rossi has only indicated that it belongs to a particular category of organizations. One possibility is that it’s a military organization given that the title of the controller Fioravanti in the report is “colonel”, however, scored out with a pen.
Rossi stated that an agreed contract research at the University of Bologna can now be initiated and that discussions on collaboration with Uppsala University can get started.
There’s still no clear indication of when a test performed by independent experts can be done, although this is still what both readers of Ny Teknik and most experts Ny Teknik has spoken to demand.
- – - -
READ MORE: Our complete coverage on Rossi’s E-cat can be found here.
- – - -
More details on the test here below.
- – - -
UPDATE: David Roberson who made one of three analyses that Ny Teknik published last week on the October 6 test , has made an updated analysis here, which he claims contains proof that the E-cat generated a large amount of excess energy.
Also Horace Heffner’s analysis has been updated.
- – - -
UPDATE 2: There are two minor errors in the customer’s report:
1. The weight of the hydrogen bottle should be in grams, not kg as indicated.
2. The indicated flow rate of the pumps at the end of the report should be 350 kg/hour, not 750 kg/hour, giving a total of 700 kg/h, not 1,500 kg/h, for the two pumps.
(The measured average flow rate of 675.6 l/h in the first part of the report should be correct).